Parker AC890 Product Manual page 464

Parameter Descriptions
WARNINGS WORD 3
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 4
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 5
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
WARNINGS WORD 6
Indicates which conditions are likely to cause a trip. These parameters are a coded representation of the warning status. See
below for a description of how this parameter is formed.
FIRST TRIP
From when a trip occurs until that trip is reset, this parameter indicates the trip source. When several trips have occurred, this
parameter indicates the first one that was detected.
U PHASE FAULT
V PHASE FAULT
W PHASE FAULT
These parameters are valid on an 890PX. They indicate which output phase(s) has(have) reported a fault. Typically, these
parameters may be used to identify the phase on which a fan has failed or an over temperature condition has occurred.
890SD Standalone Drive - Frames G, H & J
PREF: 97.16
PREF: 97.17
PREF: 97.24
PREF: 97.25
PREF: 97.09
PREF: 97.26, 97.27, 97.28
Default: 0000
Default: 0000
Default: 0000
Default: 0000
Default: 0
Default: FALSE
Range: 0x0000 to 0xFFFF
Range: 0x0000 to 0xFFFF
Range: 0x0000 to 0xFFFF
Range: 0x0000 to 0xFFFF
Range: see table below
Range: FALSE / TRUE
D-173
Page