Parker AC890 Product Manual page 78

3. Press the Start key
RUN LED will flash if the setpoint is at zero).
Reverse the motor's direction of rotation either by pressing the FORWARD/REVERSE key on the 6901
keypad, or by swapping two of the motor phases (WARNING: Disconnect the mains supply first).
4. Control the value of the Local Setpoint parameter using the
5. Press the Stop key
890SD (Standalone) Drive: Frame G, H & J
. The 6901 keypad's RUN LED will light and the motor will rotate slowly (the
.
6901 Keypad
SETPOINT (LOCAL)
10.0 %

SETPOINT (LOCAL)
10.0 %

menu at level 1
L
R
M
E
x 2
890SD Standalone Drive
keys.
Page
4-59