Parker AC890 Product Manual page 228

ID
43
44
45
46
47
48
49
50
890SD Standalone Drive - Frames G, H & J
Message
6901 Keypad
SUPER USER
TRUE
INCOMPATIBLE
POWER BOARD
CALIBRATION
CHECKSUM FAIL
INCOMPATIBLE
PCB
INCOMPATIBLE
POWER BOARD TYPE
INCOMPATIBLE
EEPROM FLAGS
INCOMPATIBLE
POWER BOARD CODE
KEY INACTIVE
Alert Message IDs
6511 Keypad
SUPR Reserved for Parker Hannifin Manufacturing
Power board 500v and/or underlap signals
ERR6
incompatible with selected product code.
CAL The control board calibration data is invalid.
Software is not compatible with this version of
PCB
control card PCB.
TYPE Stack has been marked as a 650 or Baldor stack
Reserved flags in stack eeprom are not zero.
FLGS
See comms command ri.
Product code not compatible with this version
CODE
of software.
Alert shown when the RUN key is pressed
when the Pre-charge relay is still open. This
PRE
implies that the DC Link voltage is below the
under-voltage trip level.
Trips and Fault Finding
Reason
Page
9-23