Parker AC890 Product Manual page 321

Parameter Descriptions
COEFFICIENT A
Coefficient used as defined by the formula.
COEFFICIENT B
Coefficient used as defined by the formula.
COEFFICIENT C
Coefficient used as defined by the formula.
HIGH LIMIT
Use high limit to set a maximum value for the modified parameter on the keypad. Setting the HIGH LIMIT lower than or
equal to the LOW LIMIT makes the parameter "read-only".
LOW LIMIT
Use low limit to set a minimum value for the modified parameter on the keypad. Setting the HIGH LIMIT higher than or
equal to the HIGH LIMIT makes the parameter "read-only".
UNITS
A 6 character label that is displayed as the parameter units.
D-30
Page
PREF: 65.03, 66.03, 67.03,
68.03
PREF: 65.04, 66.04, 67.04,
68.04
PREF: 65.05, 66.05, 67.05,
68.05
PREF: 65.06, 66.06, 67.06,
68.06
PREF: 65.07, 66.07, 67.07,
68.07
PREF: 65.08, 66.08, 67.08,
68.08
Default: 1.00
Default: 1.00
Default: 0.00
Default: 0.00
Default: 0.00
Default:
890SD Standalone Drive - Frames G, H & J
Range: -300.00 to 300.00
Range: -300.00 to 300.00
Range: -300.00 to 300.00
Range: -300.00 to 300.00
Range: -300.00 to 300.00
Range: max length is 6 chars