Parker AC890 Product Manual page 28

Frame G, H & J
Mounting
Orientation
Power
Terminations
Control
Terminations
890SD (Standalone) Drive: Frame G, H & J
Vertical, on a solid, flat, vertical surface
3-phase supply and output terminals
Bus-bars with 2 off M12 holes, 25mm separation.
2 off M12 bolt, nut and washer supplied. Tightening torque 97Nm (71.5lb-ft)
Protective earth terminals
4 off M10 bolts with conical washers - supplied loose. Tightening torque 55Nm
(40.5lb-ft)
DC link terminals
Bus-bars with 2 off M12 holes, 35mm separation.
Designed to accept semiconductor fuses directly mounted on terminals (eg.
Ferraz-Shawmut A100P)
2 off M12 bolt, nut and washer supplied. Tightening torque 97Nm (71.5lb-ft)
Dynamic brake terminal
Bus-bars with 2 off M12 holes, 44mm separation.
2 off M12 bolt, nut and washer supplied. Tightening torque 97Nm (71.5lb-ft)
Removable screw connectors for 0.75mm2 wire (18 AWG).
Terminals will accept up to 1.5mm
Tightening torque 0.6Nm (0.4lb-ft)
890SD Standalone Drive
2
wire (16 AWG).
4-9
Page