The Keypad
1
Control Key Definitions
Keys for Programming the Drive
890SD (Standalone) Drive: Frame G, H & J
UP
Navigation - Moves upwards through the list of parameters or menus
Parameter - Increments the value of the displayed parameter.
Command Acknowledge - Confirms action when in a command menu.
DOWN
Navigation - Moves downwards through the list of parameters or menus
Parameter - Decrements the value of the displayed parameter.
ESCAPE
Navigation - Displays the previous level's Menu.
Parameter - Returns to the parameter list.
E
Trip Message - Clear the Trip or Error message from the display.
MENU
Navigation - Displays the next Menu level, or the first parameter of the current
Menu.
M
Parameter - Allows a writable parameter to be modified (this is indicated by
appearing on the left of the bottom line). Hold to display the PREF.
PROG
Navigation - Toggles between current locations within the Operator menu and
any other menu.
PROG
LOCAL/
Control - Toggles between Remote and Local Mode for both Start/Stop (Seq)
REMOTE
and Speed Control (Ref). When toggling, the display automatically goes to the
relevant SETPOINT screen, and the SETPOINT (LOCAL) screen will have the
L
R
and keys enabled to alter the setpoint.
→
7-4
Page