[2].
[2]
2) Remove the following from the back:
spring [1]
E-ring [2]
spacer [3]
bearing [4]
stopper [5]
[1]
3) Remove the following from the front:
screw [1]
spring [2]
E-ring [3]
spacer [4]
bearing [5]
stopper [6]
break [7]
4) Remove the registration roller [8].
[6]
[5]
[4]
[3]
[1]
F-8-154
[4]
[5]
[3]
[2]
F-8-155
[2]
[8]
[7]
[1]
F-8-156
8.10.18 Pre-Registration Motor
8.10.18.1 Removing the Rear Cover (upper)
1) Open the cable clamp [1], and free the reader unit communications
cable [2].
[1]
2) Remove the 6 screws [1], and detach the upper rear cover [2].
[2]
8.10.18.2 Removing the Main Controller Box
1) Remove the 4 screws [1], and detach the main controller box cover
[2].
Chapter 8
0009-3920
[2]
F-8-157
[1]
[1]
F-8-158
0009-3921
8-57