Checking The Firmware Version Number; Security Authentication Firmware Version Number; Accessing The Service Mode; Access Method To The Service Mode - Konica Minolta bizhub 4750 Service Manual

5. Checking the firmware version number

5. Checking the firmware version number
• Confirm the need to enhance or not to enhance the security function with the administra-
tor of this machine: If administrator wants to enhance, check the firmware version num-
ber.
• If the firmware version/revision number of this machine is different from numbers shown
in the list below, it will be necessary to re-write to the following certified firmware version.
Refer to P.16 for the method of how to re-write the firmware.
5.1

Security authentication firmware version number

Firmware type
Controller firmware
Refer to P.9 for the method of checking the firmware version.
6.

Accessing the Service Mode

6.1

Access method to the Service Mode

1. Touch [Menu].
2. Touch [Counter].
3. Touch [Keypad].
4. Press the following keys in this order:
Stop → 0 → 0 → Stop → 0 → 1
5. Touch [Password], and enter the CE password using the screen keyboard or the 10-key
pad.
NOTE
• The CE password entered is displayed as "✱."
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KONICA MINOLTA (hereafter called KM).
If the CE password is forgotten, replacement of the MFP board will initialize the
setting values and turn "OFF" the Enhanced Security mode. Be sure to have the
administrator set the Enhanced Security mode back to "ON" again.
4
Security Function Ver. 1.01 Sep. 2014
Version
A6F730G0139-999
A6F7S1E001DA