Connecting The Power Cord; Starting The Machine; Serial Number Input; Unit Change - Konica Minolta BIZHUB 367 Installation Manual

11. Connecting the power cord

(1) Connect the power cord.
Note:
This may not be performed depending on the
applicable marketing area.
(2) Plug the power cord into the power outlet.

12. Starting the machine

Turn ON the power switch on the right side of the
main body.
13. Date & Time Setting/Time Zone Setting

(Service Mode)

(1) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(2) Display the Date & Time Setting/Time Zone Set-
ting screen.
(To display the Date & Time Setting/Time Zone
Setting screen, press Stop → 1 → 1 → 4 → 4 →
Clear on the control panel.)
(3) Do not input date and time but touch "Entry" of
the Date & Time Setting.
(4) Input the time zone using up/down keys or direct
keys.
(5) Touch "Entry" of the Time Zone Setting.
(6) Touch "Apply."
(7) Touch "OK."
(8) Touch "END."

14. Serial number input

Note:
Serial number input is, if necessary, needed only
for the optional devices installed in "9. Installing
other options."
(1) Select the Serial Number Input function as fol-
lows: System 1 → Serial Number.
(2) Touch the item you want to enter and input the
serial number.
(3) Touch "END."
(4) For other devices, enter their serial number in
the same way.
(5) Touch "END."

15. Unit change

Note:
This function allows the user to select the type of
message that will appear when the replacement
time arrives for each of the different units.
(1) Select the Unit Change function as follows:
System 2 → Unit Change.
(2) Select the appropriate message type for each
unit.
(3) Touch "END."
E-7