Load And Save; Http - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
4.4.4

Load and Save

4.4.4.1

HTTP

Loading and saving data using HTTP
The WBM allows you to store device data in an external file on your client PC or to load such
data from an external file from the PC to the devices. This means, for example, that you can
also load new firmware from a file located on your Admin PC. On this page, the certificates
required to establish a secure VPN connection can also be loaded.
Note
Configuration files and trial mode/Automatic Save mode
In Automatic Save mode, the data is saved automatically before the configuration files
(ConfigPack and Config) are transferred.
In Trial, although the changes are adopted, they are not saved in the configuration files
(ConfigPack and Config). Use the "Write Startup Config" button on the "System >
Configuration" WBM page to save changes in the configuration files.
Description
The table has the following columns:
● Type
Shows the file type.
● Description
Shows the short description of the file type.
70
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02