Load Factory Settings - Siemens SINAUT MD741-1 System Manual

3.9

Load factory settings

The factory settings of the SINAUT MD741-1 can be restored by the following
means:
Figure 3-11
Reset to factory settings
A click on the push button Reset loads the factory settings, resets the passwords
and deletes the stored certificates, the configuration profiles and the archived log
files.
Service button (SET)
The load of the factory settings can also be activated by pushing the service button
(see chapter 2.4).
Default configuration
If just the factory settings shall be loaded, without to delete the certificates,
configuration profiles and the archived log files, just activate the default
configuration as being described in chapter 3.6.
SINAUT MD741-1
C79000- G8976-C212
Maintenance > Factory Reset
Configuration
37