3.10
Load factory settings
The factory settings of the SINAUT MD741-1 can be restored by the following
means:
Figure 3-11
Reset to factory settings
A click on the push button Reset loads the factory settings, resets the passwords
and deletes the stored certificates, the configuration profiles and the archived log
files.
Service button (SET)
The load of the factory settings can also be activated by pushing the service button
(see chapter 2.5).
Effects of resetting to factory settings
Notice
Deleting data
Note the following effects before you reset the device to the factory settings:
The device is reset to the factory settings and runs a restart. This may take
●
several minutes.
All the configuration data that was entered is deleted. This also includes user
●
names and access passwords.
The PIN of the SIM card is deleted in the configuration data.
●
Created configuration profiles are deleted.
●
SINAUT MD741-1
C79000-G8976-C236-05
Maintenance > Factory Reset
3 Configuration
41