Ln2600 Router Status Led; Figure 5: Ln2600 Router Front Panel; Table 3: Ln2600 Router Faceplate Leds Status; Table 4: Ln2600 Router Status Led - Juniper LN2600 Manual

LN2600 Rugged Security Router

LN2600 Router Status LED

Table 3: LN2600 Router Faceplate LEDs Status

LED
A
B
LINK
ACT

Table 4: LN2600 Router Status LED

Status LED Color
Off; No color
8
The LN2600 router includes LEDs on the front panel to provide status information.

Figure 5: LN2600 Router Front Panel

LN2600
1— USB port
2— ACT and Link LEDs
3— Ethernet port
4— RJ-45 console port
5— Power LED - DC power input
Table 3 on page 8 provides information on the LEDs present on the faceplate of the
LN2600 router.
Color
Off; No color
Steady green
Off; No color
Steady green
Off; No color
Blinking green
On initial power-on, the components of the router run boot code, go through a series of
self-diagnostic tests, and synchronize with each other. When the tests are complete, use
the status LED on the router front panel to determine the status of the router.
Table 4 on page 8 provides information about the status LED located on the top cable
cover of the LN2600 router.
the LN2600 router.
Meaning
Power is off.
6— DC power input port A
7— DC power input port B
8—
Power LED - DC power input
9— Status LED port
A
Meaning
Power is off.
Ready for operation.
The router is powered on and has a
proper power supply.
No link on associated port.
On; link established.
No activity.
Traffic activity.
Figure 1 on page 3 shows the position of the status LED on
CONSOLE
B
Copyright © 2018, Juniper Networks, Inc.