Monitoring System Log Messages; Table 66: Filtering System Log Messages - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation

Monitoring System Log Messages

Purpose
Action

Table 66: Filtering System Log Messages

Field
System Log File
292
Table 65: Backup Routing Engine Alarms (continued)
Chassis
Component Alarm Condition
Multibit The backup Routing Engine
Memory reports a multibit ECC error.
ECC
Field-Replaceable Units in an EX9200 Switch on page 19
Craft Interface in an EX9200 Switch on page 22
Understanding Alarm Types and Severity Levels on EX Series Switches on page 283
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to filter and view system log messages for EX Series
switches.
To view events in the J-Web interface, select
Apply a filter or a combination of filters to view messages. You can use filters to display
relevant events. Table 66 on page 292
the associated actions.
To view events in the CLI, enter the following command:
show log
Function
Specifies the name of a system log file for
which you want to display the recorded events.
Lists the names of all the system log files that
you configure.
By default, a log file,
messages
the directory.
/var/log/
Alarm
Severity Remedy
Minor Reboot the system with the board
(yellow) reset button on the backup Routing
Engine.
If the alarm recurs, open a support
case using the Case Manager link
at
http://www.juniper.net/support/
or call 1-888-314-5822 (toll free,
US & Canada) or 1-408-745-9500
(from outside the United States).
>
Monitor Events and Alarms
describes the different filters, their functions, and
Your Action
To specify events recorded in a particular
file, select the system log filename from
the list—for example,
Select
Include archived files
archived files in the search.
, is included in
Copyright © 2017, Juniper Networks, Inc.
> .
View Events
messages .
to include