Management And Console Port Leds On The Front Panel; Cooling System And Airflow In An Acx2000 And Acx2100 Router - Juniper ACX2000 Hardware Manual

Table 16: SFP and SFP+ Link LEDs (continued)
Name Location
RX Left

Management and Console Port LEDs on the Front Panel

Two RJ-45 ports, labeled MGMT and CONSOLE/AUX, each have a pair of LEDs that display the status
of the port. Table 17 on page 60
Table 17: Management and Console LEDs
Name Location
Link/Activity Right
RX Left
SEE ALSO
Troubleshooting Resources for ACX2000 and ACX2100 Routers | 126
Cooling System and Airflow in an ACX2000 and
ACX2100 Router
The ACX2000 and ACX2100 routers do not contain fans and are passively cooled by the heatsinks (see
Figure 14 on page 61).
Temperature sensors in the chassis monitor the temperature within the chassis. If the temperature inside
the chassis rises above the threshold, the router shuts down automatically.
Color State
Green Blinking
– Off
describes the LEDs in more detail.
Color State
Amber On
Yellow Blinking
– Off
Green Blinking
– Off
Description
The port is receiving data.
The port is not receiving data.
Description
Link is online.
Indicates link activity.
No link.
The port is receiving data.
The port is not receiving data.
60