Show Users Login-History; Passwords Min-Length - NETGEAR GSM7228PS Cli Manual

Term Definition
User Name The full name of the user.

show users login-history

This command is used to display the users who have logged in previously.
Format
show users login-history [{user name}]
Mode Privileged EXEC
Term Definition
Login Time The time at which the user logged in.
Username The user name used to login.
Protocol The protocol that the user used to login.
Location The location of the user.

passwords min-length

Use this command to enforce a minimum password length for local users. The value also applies to
the enable password. The valid range is 0-64.
Default 8
Format
passwords min-length <0-64>
Mode Global Config
no passwords min-length
Use this command to set the minimum password length to the default value.
Format
no passwords min-length
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
10-34