8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Note: To navigate to this page, select System > Status > Switch Information.
View the port statistics
For each switch port, you can view the bytes received, bytes sent, and cyclic redundancy
check (CRC) error packets.
Use the local browser interface to view and clear the port
statistics
To view and clear the port statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 17.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > Monitoring > Port Statistics.
Manage and Monitor the Switch
88
User Manual