Chapter 16 Sntp; Show Sntp (Cli Only) - NETGEAR ProSafe GSM5212P Software Administration Manual

SNTP
16.
Simple Network Time Protocol
This chapter provides the following examples:
•

Show SNTP (CLI Only)

• Configure SNTP
• Set the Time Zone (CLI Only)
• Set the Named SNTP Server
The SNTP feature offers these benefits:
• It can be used to synchronize network resources and for adaptation of NTP.
• SNTP provides synchronized network timestamp.
• It can be used in broadcast or unicast mode.
• It supports SNTP client implemented over UDP, which listens on port 123.
Show SNTP (CLI Only)
The following are examples of the commands used in the SNTP feature.
show sntp
(Netgear Switch Routing) #show sntp?
<cr> Press Enter to execute the command.
client Display SNTP Client Information.
server Display SNTP Server Information.
on page 289
on page 291
on page 291
16
Chapter 16. SNTP | 287