Show Radius Servers - NETGEAR GSM7228PS Cli Manual

Term
Number of Retransmits
Time Duration
RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the servers
RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has been
RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-
The following shows example CLI display output for the command.
(Switch)#show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60

show radius servers

This command displays the summary and details of RADIUS authenticating servers configured for
the RADIUS client.
Format
show radius servers [ { <ipaddr | dnsname> | name [<servername> ] } ]
Mode Privileged EXEC
Field
ipaddr
dnsname
servername
Current
Management Commands
Definition
The configured value of the maximum number of times a request packet is
retransmitted.
The configured timeout value, in seconds, for request re-transmissions.
is enabled or not.
enabled to use in RADIUS requests.
Address attribute to be used in RADIUS requests.
Description
The IP address of the authenticating server.
The DNS name of the authenticating server.
The alias name to identify the server.
The '*' symbol preceeding the server host address specifies that the server is
currently active.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
10-60