About This Manual; Audience; Scope; Command Line Interface Reference For The Prosafe 7200R Series - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

This chapter introduces the Command Line Interface Reference for the ProSafe 7200R
Series Layer-2 Switches with Static Routing, Software Version 7.0. It describes the
command-line interface (CLI) commands used to view and configure the 7200R Series
Managed Switch software. You can access the CLI by using a direct connection to the
serial port or by using telnet or SSH over a remote network connection.

1.1 Audience

This document is for system administrators who configure and operate systems using
7200R Series Managed Switch software. Software engineers who integrate 7200R Series
Managed Switch software into their hardware platform can also benefit from a description
of the configuration options.
This document assumes that the reader has an understanding of the 7200R Series Managed
Switch software base and has read the appropriate specification for the relevant
networking device platform. It also assumes that the reader has a basic knowledge of
Ethernet and networking concepts.

1.2 Scope

This manual is written for the 7200R Series Managed Switch according to these
specifications:
Table 1-1. Manual Specifications
Product
Manual Part Number
Manual Publication Date

About This Manual

ProSafe 7200R Series Layer-2 Managed Switch with Static
Routing
202-10354-01
November 2007
v1.0, November 2007
Chapter 1
About This Manual
1-1