Subaru 2002 IMPREZA Service Manual page 1999

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

5) Insert the drive pinion into differential carrier, in-

stall the previously selected bearing preload adjust-

ing spacer and washer.

(A) Drive pinion

(B) Bearing preload adjusting spacer

(D) Differential carrier

6) Press-fit the front bearing cone into carrier with

ST1, ST2 and ST3.

ST1 32285AA000 DUMMY COLLAR

ST2 399780104

ST3 899580100

7) Insert the spacer, then press-fit the pilot bearing

with ST1 and ST2.

ST1 399780104

ST2 899580100

REAR DIFFERENTIAL FOR VA-TYPE

8) Fit a new oil seal with ST.

• Press-fit until the end of oil seal is 1 mm (0.04 in)

inward from end of carrier.

• Apply grease between the oil seal lips.

ST 498447120

9) Press-fit the companion flange with ST1 and

Be careful not to damage the bearing.

ST1 899874100

ST2 399780104

10) Install the self-locking nut. Then tighten it with

ST 498427200

FLANGE WRENCH

Tightening torque:

188 N·m (19.2 kgf-m, 139 ft-lb)

DIFFERENTIALS

Chapters

Table of Contents

2001 impreza