Subaru 2002 IMPREZA Service Manual page 1565

C: REMOVAL
1) Set up the vehicle on a lift.
2) Move the select lever to "N" range.
3) Remove the air cleaner case. (Non-turbo model)
<Ref. to IN-6, REMOVAL, Air Cleaner Case.>
4) Remove the intercooler. (Turbo model)
<Ref. to IN(TURBO)-10, REMOVAL, Intercooler.>
5) Disconnect the inhibitor switch connector.
(A) Inhibitor switch
6) Remove the inhibitor switch connector from stay.
7) Lift-up the vehicle.
8) Remove the front and center exhaust pipes.
<Ref. to EX(w/oOBD)-9, REMOVAL, Front Exhaust
Pipe.> or <Ref. to EX-7, REMOVAL, Front Exhaust
Pipe.>
9) Remove the snap pin and washer from range se-
lect lever.
(A) Snap pin
(B) Select cable
(C) Range select lever
(D) Washer
INHIBITOR SWITCH
10) Remove the plate assembly from transmission
case.
11) Remove the bolts.
B3M1028B
12) Move the range select lever to parking position
(left side).
TR0908
AT-29
AUTOMATIC TRANSMISSION
(A) Select cable
(B) Plate ASSY
(A) Inhibitor switch
(A) Range select lever
B3M1030H
B3M1031B
B3M1032B