Subaru 2002 IMPREZA Service Manual page 2455

(2) Tighten the bolts which install oil pump to
bracket.
Tightening torque:
37.3 N·m (3.8 kgf-m, 27.5 ft-lb)
Tightening torque:
15.7 N·m (1.6 kgf-m, 11.6 ft-lb)
2) Tighten the bolts which install power steering
pump bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
OIL PUMP
POWER ASSISTED SYSTEM (POWER STEERING)
3) Interconnect the pipes C and suction hose.
Tightening torque:
Joint nut
39 N·m (4.0 kgf-m, 28.9 ft-lb)
CAUTION:
If a hose is twisted at this step, the hose may
come into contact with some other parts.
ST0020
4) Connect the connector to power steering oil
pressure switch.
5) Install the pulley belt to oil pump.
6) Check the pulley belt tension. <Ref. to ME(TUR-
BO)-45, INSPECTION, V-belt.>
7) Tighten bolt belt tension.
ST0018
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
8) Install the pulley belt cover.
9) Connect the battery ground cable to battery.
10) Feed the specified power steering fluid <Ref. to
PS-107, Power Steering Fluid.>
CAUTION:
Never start the engine before feeding the fluid;
otherwise vane pump might be seized up.
B2M3151
PS-93
(1) Suction hose
(2) Pipe C
ST0017