CLUTCH SYSTEM
C: DISASSEMBLY
1. EXCEPT RHD TURBO MODEL
1) Remove the straight pin and reservoir tank.
(A)
(A) Reservoir tank
(B) Straight pin
2) Remove the oil seal.
(A) Oil seal
(B) Master cylinder
3) Move the cylinder boot backward.
(B)
(A) Cylinder boot
(B) Master cylinder
4) Remove the stop ring.
CAUTION:
Be careful when removing the snap ring to pre-
vent the rod, washer, piston and return spring
from flying out.
5) Remove the clutch damper.
MASTER CYLINDER
(B)
TR0471
(A)
(B)
TR0472
(A)
TR0473
2. RHD TURBO MODEL
1) Remove the hose.
2) Remove the reservoir tank and bracket.
(A)
(A) Reservoir tank
(B) Bracket
3) Remove the straight pin and adapter.
(A)
(A) Straight pin
(B) Adapter
CL-32
TR0530
(B)
TR0531
(B)
TR0524