Subaru 2002 IMPREZA Service Manual page 1878

CLUTCH SYSTEM
7) Remove the bolts and nuts which secure brake
and clutch pedals, and remove pedal bracket and
clutch cable as a unit.
(A)
(A) Clutch pedal
(B) Brake pedal
8) Depress the clutch pedal, then disconnect the
clutch cable from clutch pedal.
2. RHD MODEL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from clutch. (With
cruise control)
3) Remove the instrument panel lower cover.
4) Remove the snap pin and clevis pin that join
push rod and clutch pedal. (Except 1.6 L model)
5) Remove the master cylinder mounting nuts. (Ex-
cept 1.6 L model)
(A) Master cylinder
CLUTCH PEDAL
6) Remove the PHV adjusting nut and lock nut.
(with hill holder)
7) Remove the cable clamp and disconnect the
PHV cable from PHV. (with hill holder)
CAUTION:
(B)
Carefully protect the boot and inner cable from
damage when disconnecting the PHV cable.
TR0494
8) Disconnect the clutch cable from release lever.
(1.6 L model)
9) Remove the clutch pedal and bracket as a unit.
B4M1749B
CL-42
(A) Adjusting nut
(B) Lock nut
(C) PHV
(A) PHV cable
(B) Clamp
(A) Clutch pedal bracket
(B) Clutch pedal
S4M0241B
S4M0242B
B4M1752B