Subaru 2002 IMPREZA Service Manual page 1892

FRONT SUSPENSION
1. General Description
A: SPECIFICATIONS
Camber (tolerance: ±0°45')
Caster (common difference: ±0°45')
Toe-in
Kingpin angle (tolerance: ±0°45')
Front
Wheel arch height
[tolerance: ±12 mm (±0.47 in)]
Diameter of stabilizer
Camber (tolerance: ±0°45')
Toe-in
Thrust angle
Rear
Wheel arch height
[tolerance: ±12 mm (±0.47 in)]
Diameter of stabilizer
NOTE:
• Front and rear toe-ins and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the mid-
dle value of specification.
• The other items indicated in the specification ta-
ble cannot be adjusted. If the other items exceeds
specifications, check suspension parts and con-
nections for deformities; replace with new ones as
required.
GENERAL DESCRIPTION
Model
Sedan
Turbo Non-turbo
−0°25' −0°15'
3°35' 3°25'
0±3 mm (0±0.12 in) Each toe angle: ±0°07'30"
14°35' 14°20'
396 mm 406 mm
(15.59 in) (15.98 in)
20 mm 20 mm
(0.79 in) (0.79 in)
−1°30' −1°25'
−1±2 mm (−0.039±0.079 in) Each toe angle: ±0°07'30"
376 mm 381 mm
(14.80 in) (15.0 in)
20 mm
—
(0.79 in)
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α = Each toe angle
FS-2
Wagon
Turbo Non-turbo
−0°20' −0°10'
3°35' 3°25'
13°45' 13°30'
387 mm 397 mm
(15.24 in) (15.28 in)
20 mm 20 mm
(0.79 in) (0.79 in)
−1°20' −1°15'
0°±20'
376 mm 381 mm
(14.80 in) (15.0 in)
17 mm
—
(0.67 in)
B4M2250B
OUTBACK
−0°05'
3°25'
13°20'
402 mm
(15.83 in)
20 mm
(0.79 in)
−1°10'
386 mm
(15.20 in)