Subaru 2002 IMPREZA Service Manual page 2366

POWER ASSISTED SYSTEM (POWER STEERING)
CAUTION:
This table lists various clearances that must be correctly adjusted to ensure the normal vehicle driv-
ing without interfering noise, or any other faults.
(1) Crossmember — Pipe
(2) DOJ — Shaft or joint
(3) DOJ — Valve housing
(4) Pipe — Pipe
(5) Stabilizer — Pipe
(6) Exhaust pipe — Pipe
(7) Exhaust pipe — Gearbox bolt
(8) Side frame — Hose A and B
(9) Cruise control pump — Hose A and B
(10) Pipe portion of hose A — Pipe portion of hose B
(11) AT cooling hose — Joint
RHD MODEL
GENERAL DESCRIPTION
Location
PS-4
Minimum allowance
5 mm (0.20 in)
14 mm (0.55 in)
11 mm (0.43 in)
2 mm (0.08 in)
5 mm (0.20 in)
11 mm (0.43 in)
15 mm (0.59 in)
10 mm (0.39 in)
15 mm (0.59 in)
1.5 mm (0.059 in)
20 mm (0.79 in)
ST0001