Subaru 2002 IMPREZA Service Manual page 1920

REAR SUSPENSION
1. General Description
A: SPECIFICATIONS
Item
Camber (tolerance: ±0°45')
Toe-in
Wheel arch height
[tolerance: ±12 mm (±0.47 in)]
Thrust angle
Diameter of stabilizer
NOTE:
• Front and rear toe-ins and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the mid-
dle value of specification.
• The other items indicated in the specification ta-
ble cannot be adjusted. If the other items exceeds
specifications, check suspension parts and con-
nections for deformities; replace with new ones as
required.
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α1, α2: Each toe-in angle
GENERAL DESCRIPTION
Sedan
Turbo Non-turbo
−1°30' −1°25'
376 mm 381 mm
(14.80 in) (15.0 in)
20 mm
—
(0.79 in)
B4M2250C
RS-2
Wagon
Turbo Non-turbo
−1°20' −1°15'
−1±2 mm (−0.039±0.079 in)
Each toe-in angle: ±0°07'30"
376 mm 381 mm
(14.80 in) (15.0 in)
0°±20'
17 mm
(0.67 in)
OUTBACK
−1°10'
386 mm
(15.20 in)
—