CLUTCH SYSTEM
• 1.6 L MODEL
1) Remove the clip, and then remove the spring as-
sist and spring.
(A)
(A)
(B)
(A) Spring assist
(B) Spring
2) Remove the clutch pedal and brake pedal.
3) Remove the bushing, stopper and clutch pedal
pad.
( A )
(A) Bushing
(B) Stopper
(C) Clutch pedal pad
4) Remove the adjuster bolt.
2. RHD MODEL
• Except 1.6 L MODEL
1) Remove the clutch switch. (With cruise control)
CLUTCH PEDAL
TR0943
TR0944
( A )
( B )
( C )
TR0945
2) Remove the clip, then pull out the clevis pin.
(A) Clevis pin
3) Remove the assist rod, spring and bushing.
4) Remove the clutch pedal from clutch pedal
bracket.
(A) Clutch pedal bracket
(B) Clutch pedal
5) Remove the following parts (B to H) from clutch
pedal bracket (A) as shown in the figure.
(A) Clutch pedal bracket
(B) Bushing C
(C) Clip
(D) O-ring
(E) Bushing S
(F) Spring S
(G) Rod S
(H) Bushing
CL-44
B2M4226A
B2M4227A
B2M4228A