Subaru 2002 IMPREZA Service Manual page 2447

12) Feed the specified fluid.
NOTE:
Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
(1) Clearance between blow-by hose
and pipe: 3 — 5 m (0.12 — 0.20
in)
(2) No interference is allowed
between hoses.
13) Finally check clearance between pipes and/or
hoses, as shown above.
Pipe-to-crossmember clearance:
10 mm (0.39 in), min.
(1) Check that the clearance between cruise
control pump and power steering hose is at least
10 mm (0.39 in). If it is not, bend the section (B)
down until a clearance of at least 10 mm (0.39
in) is obtained.
PIPE ASSEMBLY [RHD MODEL]
(1)
(3) Clearance between side frame
and hose: 15 mm (0.59 in) or
more
(4) Clearance between crossmember
and pipe: 5 — 13 mm (0.20 —
0.51 in)
PS-85
POWER ASSISTED SYSTEM (POWER STEERING)
(2)
(3)
(4)
(5)
(5) Steering gearbox
ST0108