E: INSPECTION
1) Check each part (bush, cushion rubber, spacer,
boot, stay and rod, etc.) for deformation, damage
and wear. Repair or replace any defective part. De-
termine defective parts by comparing with new
parts.
(A) Bush
(B) Cushion rubber
(C) Spacer
(D) Boot
(E) Stay
(F) Rod
MT GEAR SHIFT LEVER
2) Check the swing torque of the rod in relation of
gear shift lever.
If the torque exceeds specification, replace the
bush or retighten nuts.
Rocking torque:
0.7 N·m (0.07 kgf-m, 0.5 ft-lb) or less
B3M1765A
CS-17
(A) Center of rotation
(B) Swing torque
CONTROL SYSTEMS
B3M1829C