Download Print this page
Subaru IMPREZA 2001 Service Manual
Subaru IMPREZA 2001 Service Manual

Subaru IMPREZA 2001 Service Manual

Hide thumbs Also See for IMPREZA 2001:

Advertisement

2001 IMPREZA SERVICE MANUAL

BODY SECTION

This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reas-
sembling, inspection and adjustment of
components and diagnostics for guid-
ance of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
All information, illustration and specifi-
cations contained in this manual are
based on the latest product information
available at the time of publication
approval.
FUJI HEAVY INDUSTRIES LTD.
QUICK REFERENCE INDEX
HVAC SYSTEM
(HEATER, VENTILATOR AND A/C)
HVAC SYSTEM (AUTO A/C)
(DIAGNOSTICS)
AIRBAG SYSTEM
AIRBAG SYSTEM (DIAGNOSTICS)
SEAT BELT SYSTEM
LIGHTING SYSTEM
WIPER AND WASHER SYSTEMS
ENTERTAINMENT
COMMUNICATION SYSTEM
GLASS/WINDOWS/MIRRORS
BODY STRUCTURE
INSTRUMENTATION/DRIVER INFO
SEATS
SECURITY AND LOCKS
IMMOBILIZER (DIAGNOSTICS)
SUNROOF/T-TOP/CONVERTIBLE TOP
(SUNROOF)
EXTERIOR/INTERIOR TRIM
AC
AC
AB
AB
SB
LI
WW
ET
COM
GW
BS
IDI
SE
SL
IM
SR
EI
G1830GE6

Advertisement

loading

Summary of Contents for Subaru IMPREZA 2001

  • Page 1: Body Section

    HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) AIRBAG SYSTEM AIRBAG SYSTEM (DIAGNOSTICS) This service manual has been prepared to provide SUBARU service personnel SEAT BELT SYSTEM with the necessary information and data for the correct maintenance and repair of SUBARU vehicles. LIGHTING SYSTEM...
  • Page 2 2001 IMPREZA SERVICE MANUAL QUICK REFERENCE INDEX BODY SECTION EXTERIOR BODY PANELS CRUISE CONTROL SYSTEM CRUISE CONTROL SYSTEM (DIAGNOSTICS) G1830GE6...
  • Page 3: Table Of Contents

    SEAT BELT SYSTEM Page General Description ..................2 Inspection Locations After a Collision ............7 Front Seat Belt ....................8 Rear Seat Belt...................10 Disposal of Pretensioner ................13...
  • Page 4: General Description

    GENERAL DESCRIPTION SEAT BELT SYSTEM 1. General Description A: COMPONENT 1. FRONT SEAT BELT BO0239 Adjuster anchor ASSY Tightening torque: N·m (kgf-m, ft-lb) Anchor cover T1: 7.5 (0.76, 5.5) Outer belt ASSY T2: 30 (3.1, 22) Inner belt ASSY T3: 53 (5.4, 39) SB-2...
  • Page 5 GENERAL DESCRIPTION SEAT BELT SYSTEM 2. REAR SEAT BELT (SEDAN BODY) BO0240 Outer seat belt RH Inner seat belt CENTER Tightening torque: N·m (kgf-m, ft-lb) Outer seat belt CENTER Inner seat belt LH T: 30 (3.1, 22) Outer seat belt LH Case center ELR T2: 30 (3.1, 22) Inner seat belt RH...
  • Page 6 GENERAL DESCRIPTION SEAT BELT SYSTEM 3. REAR SEAT BELT (WAGON BODY) BO0241 Outer seat belt RH Inner seat belt LH Tightening torque: N·m (kgf-m, ft-lb) Outer seat belt CENTER T1: 30 (3.1, 22) Outer seat belt LH T2: 53 (5.4, 39) Inner seat belt RH SB-4...
  • Page 7 GENERAL DESCRIPTION SEAT BELT SYSTEM B: CAUTION • Before starting, turn the ignition switch OFF, dis- connect the battery ground cable and wait for 20 seconds or more. • The pretension system has a backup power source. The pretensioner might deploy if you do not wait for 20 seconds or more before starting work.
  • Page 8: Special Tools

    GENERAL DESCRIPTION SEAT BELT SYSTEM C: PREPARATION TOOL 1. SPECIAL TOOLS ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 98299FE010 ADAPTER C • Used for deploying the pretensioner. (DEPLOYMENT) • Used with DEPLOYMENT TOOL (98299PA030). B5M1114 98299PA030 DEPLOYMENT • Used for deploying the pretensioner. TOOL •...
  • Page 9: Inspection Locations After A Collision

    INSPECTION LOCATIONS AFTER A COLLISION SEAT BELT SYSTEM 2. Inspection Locations After a Collision A: INSPECTION Check for the following, and then replace with new parts if necessary. • Center pillar lower garnish is discolored or cracked. • Wire harness and/or connector is damaged. SB-7...
  • Page 10: Front Seat Belt

    FRONT SEAT BELT SEAT BELT SYSTEM 3. Front Seat Belt 2. INNER BELT (FRONT) 1) Disconnect connector. A: REMOVAL 2) Remove anchor bolt, and then detach inner belt. 1. OUTER BELT (FRONT) 1) Fold backrest all the way forward, and then move front seat all the way forward.
  • Page 11 FRONT SEAT BELT SEAT BELT SYSTEM B: INSTALLATION C: INSPECTION 1. OUTER BELT (FRONT) 1. OUTER BELT (FRONT) Install in the reverse order of removal. Check for the following, and replace with new parts if necessary. CAUTION: • Pretensioner is cracked or deformed. •...
  • Page 12: Rear Seat Belt

    REAR SEAT BELT SEAT BELT SYSTEM 4. Rear Seat Belt 5) Remove bolts, and then detach seat belt. A: REMOVAL 1. OUTER BELT SIDE (SEDAN BODY) 1) Remove rear seat. <Ref. to SE-11, REMOVAL, Rear Seat.> 2) Remove side sill rear lower cover. <Ref. to EI-29, REMOVAL, Lower Inner Trim.>...
  • Page 13 REAR SEAT BELT SEAT BELT SYSTEM 6) Remove bolts, and then detach outer belt side. RE0007 5. OUTER BELT CENTER (WAGON BODY) 1) Loosen shoulder anchor bolt, and then detach shoulder anchor from quarter pillar. RE0008 RE0008 2) Remove quarter trim. <Ref. to EI-30, REMOVAL, Rear Quarter Trim.>...
  • Page 14 REAR SEAT BELT SEAT BELT SYSTEM B: INSTALLATION C: INSPECTION 1. OUTER BELT SIDE (SEDAN BODY) 1. OUTER BELT SIDE (SEDAN BODY) Install in the reverse order of removal. Check for the following, and replace with new parts if necessary. CAUTION: •...
  • Page 15: Disposal Of Pretensioner

    6) Connect the deployment tool and adapter C (de- vinyl bag, and then discard it. ployment) (B). • If circumstances do not permit pretensioner de- ployment, contact a SUBARU dealer. Deployment tool: (Part No. 98299PA030) Adapter C (deployment) : (Part No. 98299FE010) CAUTION:...
  • Page 16 DISPOSAL OF PRETENSIONER SEAT BELT SYSTEM 8) Extend the deployment tool to the limit, and 2) Turn ignition switch OFF, disconnect the ground make sure that vehicle is empty. Close all windows, cable from the battery, and wait for more than 20 sunroof, and rear gate completely.
  • Page 17 DISPOSAL OF PRETENSIONER SEAT BELT SYSTEM 9) Put three tires without the wheel on the tire in- 12) Wrap the deployed pretensioner in an airtight stalled with pretensioner. Put on an additional tire vinyl bag, and discard it. with the wheel on top, and then fasten them tight with rope.
  • Page 18 DISPOSAL OF PRETENSIONER SEAT BELT SYSTEM SB-16...