Subaru 2002 IMPREZA Service Manual page 1812

MANUAL TRANSMISSION AND DIFFERENTIAL
3) Remove the roller bearing and washer using ST
and press.
NOTE:
Do not reuse the roller bearing.
ST 498077000 REMOVER
4) Straighten the lock nut at staked portion. Re-
move the lock nut using ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
5) Remove the 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOV-
ER
6) Remove the woodruff key.
DRIVE PINION SHAFT ASSEMBLY
G3M0607
G3M0608
G3M0609
MT-88
7) Remove the roller bearing, 3rd-4th driven gear
using ST1 and ST2.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
8) Remove the key.
9) Remove the 2nd driven gear, inner baulk ring,
synchro cone and outer baulk ring. (Except 1.6 L
model)
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
10) Remove the 2nd driven gear assembly. (1.6 L
model)
G3M0610
S3M0445A