Subaru 2002 IMPREZA Service Manual page 1579

SHIFT SOLENOIDS, DUTY SOLENOIDS AND ATF TEMPERATURE SENSOR
5) Install the oil pan.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
(A) Oil pan
(B) Drain plug
6) Fill ATF up to the middle of the "COLD" side on
level gauge by using the gauge hole. <Ref. to AT-9,
Automatic Transmission Fluid.>
7) Check the ATF level. <Ref. to AT-9, Automatic
Transmission Fluid.>
1. TRANSFER DUTY SOLENOID AND
TRANSFER VALVE BODY
1) Install the transfer duty solenoid and transfer
valve body.
(1) Install the transfer duty solenoid and trans-
fer valve body.
Tightening torque:
T: 8 N·m (0.8 kgf-m, 5.8 ft-lb)
(2) Connect the transfer duty solenoid connec-
tor.
(A) Transfer valve body
(B) Transfer duty solenoid connector
(C) Transfer duty solenoid
2) Install the extension case to transmission case.
(1) Tighten eleven bolts.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
(2) Adjust the select cable. <Ref. to CS-10, AD-
JUSTMENT, Select Cable.>
3) Install the rear vehicle speed sensor.
Tightening torque:
T: 7 N·m (0.7 kgf-m, 5.1 ft-lb)
B3M1036C
4) Install the transmission rear crossmember.
(1) Tighten the bolts.
Tightening torque:
T1: 35 N·m (3.6 kgf-m, 26 ft-lb)
T2: 70 N·m (7.1 kgf-m, 51 ft-lb)
(2) Lower and remove the transmission jack.
5) Install the propeller shaft. <Ref. to DS-16, IN-
STALLATION, Propeller Shaft.>
6) Install the front, center rear exhaust pipe and
muffler. (Turbo model) <Ref. to EX(w/oOBD)-10,
INSTALLATION, Front Exhaust Pipe.>, <Ref. to
EX(w/oOBD)-13, INSTALLATION, Rear Exhaust
B3M1045G
Pipe.> and <Ref. to EX(w/oOBD)-14, INSTALLA-
TION, Muffler.> or <Ref. to EX-8, INSTALLATION,
Front Exhaust Pipe.>, <Ref. to EX-11, INSTALLA-
TION, Rear Exhaust Pipe.> and <Ref. to EX-12, IN-
STALLATION, Muffler.>
7) Install the center, rear exhaust pipes and muf-
fler. (Turbo model)
<Ref. to EX(TURBO)-9, INSTALLATION, Center
Exhaust Pipe.>, <Ref. to EX(TURBO)-13, INSTAL-
LATION, Rear Exhaust Pipe.> and <Ref. to
EX(TURBO)-14, INSTALLATION, Muffler.>
AT-43
AUTOMATIC TRANSMISSION
B3M1043A
S2M0221B