DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
Step
14
CHECK HARNESS CONNECTOR BETWEEN
TRANSMISSION AND ATF TEMPERATURE
SENSOR.
Measure the resistance of harness between
transmission connector and transmission
ground.
Connector & terminal
(T4) No. 12 — Transmission ground:
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Check
Is the resistance more than 1
MΩ?
AT-49
Yes
Replace the ATF
Repair the short
temperature sen-
circuit in harness
sor. <Ref. to AT-
between ATF tem-
40, Shift Sole-
perature sensor
noids, Duty Sole-
and transmission
noids and ATF
connector.
Temperature Sen-
sor.>
No