C: DISASSEMBLY
1) Using the ST, remove the roller bearing (exten-
sion case side).
ST 498077000
REMOVER
(A) Roller bearing
2) Using the ST1 and ST2, remove the roller bear-
ing (transfer case side).
ST1 498077000
REMOVER
ST2 899864100
REMOVER
(A) Roller bearing
TRANSFER DRIVEN GEAR
D: ASSEMBLY
1) Using the ST, install the roller bearing (extension
case side).
ST1 398177700
ST2 899864100
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton)
B3M2136A
2) Using the ST, install the roller bearing (transfer
case side).
ST 499757002
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton)
B3M2137A
E: INSPECTION
1) Bearings
Replace the bearings in the following cases:
• Broken or rusty bearings
• Worn or damaged
• Bearings that fail to turn smoothly or make ab-
normal noise when turned after gear oil lubrication.
2) Driven gear
Replace the drive gear in the following cases:
• If their tooth surfaces and shaft are excessively
broken or damaged.
MT-55
MANUAL TRANSMISSION AND DIFFERENTIAL
INSTALLER
REMOVER
(A) Roller bearing
INSTALLER
(A) Roller bearing
B3M2138A
B3M2139A