Subaru 2002 IMPREZA Service Manual page 2445

B: INSTALLATION
1) Temporarily tighten the two bolts fixing pipe C
and D. (bolt A for Non-turbo model.)
CAUTION:
Visually check that the hose between tank and
pipe D is free from bending or twisting.
• Non-turbo MODEL
(1) Bolt A
(2) Pipe C
(3) Pipe D
• Turbo MODEL
(1) Pipe C
(2) Pipe D
(1) Connect the pipe D to oil tank.
(2) Install the pipe C to oil pump.
CAUTION:
Use a new gasket.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
(3) Tighten the two bolts fixing pipe C and D.
(bolt A for Non-turbo model.)
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
PIPE ASSEMBLY [RHD MODEL]
ST0011
ST0012
PS-83
POWER ASSISTED SYSTEM (POWER STEERING)
2) Install the coolant filler tank. (Turbo model)
Tightening torque:
T1: 19 N·m (1.9 kgf-m, 13.7 ft-lb)
T2: 21 N·m (2.1 kgf-m, 15.2 ft-lb)
T1
T2
EN0127