Subaru 2002 IMPREZA Service Manual page 1863

3) Install the release lever seal.
(A) Release lever
(B) Release lever seal
4) Install the transmission assembly.
<Ref. to MT-37, INSTALLATION, Manual Trans-
mission Assembly.>
2. TURBO MODEL
1) Install the release bearing on transmission.
2) Insert the release fork into release bearing tab.
(A) Release fork
(B) Release bearing
RELEASE BEARING AND LEVER
B2M4222A
S2M1937A
CL-27
3) Apply grease to the specified points:
• Spline FX2200
• Shaft SUNLIGHT 2
(A) Spline (FX2200)
(B) Shaft (SUNLIGHT 2)
4) Insert the release fork shaft into release fork.
NOTE:
Make sure the cutout portion of release fork shaft
contacts spring pin.
(A) Release fork
(B) Release shaft
(C) Spring pin
CLUTCH SYSTEM
S2M1938A
S2M1845A