Subaru 2002 IMPREZA Service Manual page 1557

26) Remove the bolt securing ball joint of trans-
verse link to housing.
• Except sedan turbo MODEL
• Sedan turbo MODEL
27) Remove the spring pins and separate the front
drive shafts from each side of transmission.
28) Remove the nuts which hold lower side of
transmission to engine.
AUTOMATIC TRANSMISSION ASSEMBLY
S4M0090
TR0090
G2M0325
B3M2047
29) Place the transmission jack under transmis-
sion.
NOTE:
Make sure that the support plates of transmission
jack don't touch the oil pan.
30) Remove the transmission rear crossmember
from vehicle.
31) Remove the transmission.
CAUTION:
Move the transmission and torque converter as
a unit away from engine.
32) Separate the transmission assembly and rear
cushion rubber.
B: INSTALLATION
1) Install the rear cushion rubber to transmission
assembly.
Tightening torque:
39 N·m (4.0 kgf-m, 29 ft-lb)
2) Install the ST to torque converter clutch case.
ST 498277200
AT-21
AUTOMATIC TRANSMISSION
S2M0221
B3M0035
STOPPER SET
H2M1961A