Subaru 2002 IMPREZA Service Manual page 2357

3. Parking Brake Cable
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the rear tires and wheels.
3) Remove the rear cushion.
4) Remove the console box from front floor.
5) Loosen the parking cable adjusting nut and con-
sole bracket.
6) Remove the parking brake lever.
7) Roll up the floor mat and remove clamps.
8) Remove the equalizer cover.
9) Remove the inner cable end from equalizer.
(1) Equalizer
(2) Inner cable end
PARKING BRAKE CABLE
10) Pull out the parking brake cable from rear
brake.
Disc brake
<Ref. to PB-9, REMOVAL, Parking Brake Assem-
bly (Rear Disc Brake).>
Drum brake
<Ref. to BR-44, Rear Drum Brake Assembly.>
11) Pull out the clamp from rear brake.
12) Remove the bolt and bracket from trailing link
bracket.
13) Remove the bolt and clamp from rear floor.
BR0029
14) Detach the grommet from rear floor.
15) Remove the cable assembly from cabin by
forcibly pulling it backward.
16) Detach the parking brake cable from cable
guide at rear trailing link.
BR0030
S4M0473A
PB-7
PARKING BRAKE
S4M0474