Subaru 2002 IMPREZA Service Manual page 1828

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

MANUAL TRANSMISSION AND DIFFERENTIAL

C: INSPECTION

1) Move the reverse shifter rod toward the reverse

side. Inspect the clearance between reverse idler

gear and transmission case wall.

If out of specification, select the appropriate re-

verse shifter lever and adjust.

Clearance A:

6.0 — 7.5 mm (0.236 — 0.295 in)

2) After installing a suitable reverse shifter lever,

shift into neutral. Inspect the clearance between re-

verse idler gear and transmission case wall.

If out of specification, select the appropriate washer

0 — 0.5 mm (0 — 0.020 in)

3) Check the reverse idler gear and shaft for dam-

age. Replace if damaged.

REVERSE IDLER GEAR

D: ADJUSTMENT

1) Select the appropriate reverse shifter lever from

the table below, and adjust until the gap between

the reverse idler gear and transmission case wall is

within specification.

Clearance A:

6.0 — 7.5 mm (0.236 — 0.295 in)

2) Select the appropriate washer from the table be-

low, and adjust until the gap between the reverse

idler gear and transmission case wall is within

specification.

0 — 0.5 mm (0 — 0.020 in)

Reverse shifter lever

Further from case wall

Closer to case wall

Thickness mm (in)

Chapters

Table of Contents

2001 impreza