Subaru 2002 IMPREZA Service Manual page 1788

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

MANUAL TRANSMISSION AND DIFFERENTIAL

6) Tighten the seventeen bolts with bracket, clip,

etc. as shown in the figure.

• Insert the bolts from bottom and tighten the nuts

• Put the cases together so that drive pinion shim

and input shaft holder shim are not caught up in be-

• Confirm that the speedometer gear is meshed.

Tightening torque:

25 N·m (2.5 kgf-m, 18.1 ft-lb)

# # # # 10 mm bolt

39 N·m (4.0 kgf-m, 28.9 ft-lb)

7) Tighten the ball bearing attachment bolts.

Tightening torque:

29 N·m (3.0 kgf-m, 21.7 ft-lb)

TRANSMISSION CASE

8) Backlash adjustment of hypoid gear and preload

adjustment of roller bearing:

Support the drive pinion assembly with ST.

ST 498427100

9) Place the transmission with case left side facing

downward and put ST1 on bearing cup.

10) Screw the retainer assembly into left case from

the bottom with ST2. Fit the ST3 on transmission

main shaft. Shift the gear into 4th or 5th and turn

the shaft several times. Screw in the retainer while

turning ST3 until a slight resistance is felt on ST2.

This is the contact point of hypoid gear and drive

pinion shaft. Repeat the above sequence several

times to ensure the contact point.

ST1 399780104

ST2 499787000

ST3 499927100

Chapters

Table of Contents

2001 impreza