Front Disc Brake Assembly - Subaru 2002 IMPREZA Service Manual

4. Front Disc Brake Assembly

A: REMOVAL
1. 14 INCH AND 15 INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Jack-up the vehicle, and then remove the front
wheel.
4) Remove the union bolt, and then disconnect the
brake hose from caliper body assembly.
5) Remove the bolt securing lock pin to caliper
body.
6) Raise the caliper body and move it toward vehi-
cle center to separate it from support.
7) Remove the support from housing.
NOTE:
Remove the support only when replacing it or the
rotor. It need not be removed when servicing the
caliper body assembly.
8) Clean mud and foreign particles from the caliper
body assembly and support.
FRONT DISC BRAKE ASSEMBLY
B4M1844
B4M1845
B4M1192
BR-27
2. 16 INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Jack-up the vehicle, and then remove the front
wheel.
4) Remove the union bolt and, then disconnect the
brake hose from caliper body assembly.
5) Remove the caliper body from housing.
6) Clean mud and foreign particles from the caliper
body assembly and support.
BRAKE
BR0011