Subaru 2002 IMPREZA Service Manual page 1781

13.Reverse Check Sleeve
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
2) Remove the transfer case with extension case
assembly. <Ref. to MT-48, REMOVAL, Transfer
Case and Extension Case Assembly.>
3) Remove the shifter arm.
4) Remove the plug, spring washer and reverse
check ball.
5) Remove the reverse check sleeve.
B: INSTALLATION
1) Install the reverse check sleeve.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
REVERSE CHECK SLEEVE
2) Install the ball, spring, washer and plug to trans-
fer case.
Tightening torque:
3) Install the shifter arm to transfer case assembly.
4) Install the transfer case with extension case as-
sembly. <Ref. to MT-48, INSTALLATION, Transfer
Case and Extension Case Assembly.>
5) Install the manual transmission assembly to ve-
hicle. <Ref. to MT-37, INSTALLATION, Manual
Transmission Assembly.>
B3M1376
C: DISASSEMBLY
1) Cover the reverse check sleeve with a rag, and
remove the snap ring using a screwdriver.
NOTE:
Replace the snap ring with a new one if deformed
or weakened.
B3M1377
B3M1377
MT-57
MANUAL TRANSMISSION AND DIFFERENTIAL
10 N·m (1.0 kgf-m, 7.2 ft-lb)
(A) Snap ring
B3M1376
B3M1383C