Subaru 2002 IMPREZA Service Manual page 1559

10) Remove the ST.
11) Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
12) Lift-up the vehicle.
Install the front drive shafts into transmission.
(1) Lift-up the vehicle.
(2) Install the front drive shaft into transmission.
(3) Drive a new spring pin into chamfered hole
of drive shaft.
13) Connect the ball joint into housing.
AUTOMATIC TRANSMISSION ASSEMBLY
G2M0313
H3M1839A
G2M0325
14) Tighten the installing bolts.
Tightening torque:
49 N·m (5.0 kgf-m, 36 ft-lb)
(A) Transverse link
(B) Ball joint
15) Install the stabilizer link from transverse link.
• Except sedan turbo MODEL
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
• Sedan turbo MODEL
Tightening torque:
45 N·m (4.6 kgf-m, 33.2 ft-lb)
16) Install the shift select cable onto select lever.
<Ref. to CS-9, INSTALLATION, Select Cable.>
AT-23
AUTOMATIC TRANSMISSION
B2M3402A
TR0089
TR0090