Subaru 2002 IMPREZA Service Manual page 1571

FRONT VEHICLE SPEED SENSOR
AUTOMATIC TRANSMISSION
9) Install the propeller shaft. <Ref. to DS-16, IN-
STALLATION, Propeller Shaft.>
10) Install the shield cover. (If equipped)
11) Install the front, center, rear exhaust pipes and
muffler. (Non-turbo model)
<Ref. to EX(w/oOBD)-10, INSTALLATION, Front
Exhaust Pipe.>, <Ref. to EX(w/oOBD)-13, IN-
STALLATION, Rear Exhaust Pipe.> and <Ref. to
EX(w/oOBD)-14, INSTALLATION, Muffler.> or
<Ref. to EX-8, INSTALLATION, Front Exhaust
Pipe.>, <Ref. to EX-11, INSTALLATION, Rear Ex-
haust Pipe.> and <Ref. to EX-12, INSTALLATION,
Muffler.>
12) Install the center, rear exhaust pipes and muf-
fler. (Turbo model)
<Ref. to EX(TURBO)-9, INSTALLATION, Center
Exhaust Pipe.>, <Ref. to EX(TURBO)-13, INSTAL-
LATION, Rear Exhaust Pipe.> and <Ref. to
EX(TURBO)-14, INSTALLATION, Muffler.>
13) Lower the vehicle.
14) Install the transmission connector to the stay.
15) Install the pitching stopper. <Ref. to AT-25, IN-
STALLATION, Transmission Mounting System.>
16) Install the air cleaner case. (Non-turbo model)
<Ref. to IN-6, INSTALLATION, Air Cleaner Case.>
17) Install the intercooler. (Turbo model)
<Ref. to IN(TURBO)-11, INSTALLATION, Inter-
cooler.>
AT-35