Subaru 2002 IMPREZA Service Manual page 1584

AUTOMATIC TRANSMISSION
20.ATF Cooler Pipe and Hose
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the battery and washer tank.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Disconnect the ATF cooler hose from radiator.
NOTE:
• Do not remove with a screwdriver or other point-
ed tools.
• When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
6) Disconnect the ATF cooler hoses from pipes.
NOTE:
• Do not remove with a screwdriver or other point-
ed tools.
• When the hose is difficult to remove, wrap a shop
cloth around the hose to protect it. Turn it with pli-
ers, and then pull directly out with your hand.
ATF COOLER PIPE AND HOSE
B3M2052
B3M2191
AT-48
7) Remove the ATF cooler pipe from frame.
8) Remove the oil cooler inlet and outlet pipes.
NOTE:
When removing the outlet pipe, be careful not to
lose ball and spring used with retaining screw.
(A) Inlet pipe
(B) Outlet pipe
B3M2054
B3M2059B