Subaru 2002 IMPREZA Service Manual page 2420

POWER ASSISTED SYSTEM (POWER STEERING)
16) Install ST the on valve side of rack and press
outer side oil seal out.
ST 34099FA030 INSTALLER & REMOVER
CAUTION:
• Block the pipe connection of steering body to
prevent fluid from flowing out.
• Do not allow the rack to come in contact with
inner wall of cylinder. Otherwise, cylinder wall
may be scratched, resulting in oil leaks.
• Remove the holder and rack as a unit.
• Check the rack and steering body for bends
or cracks; replace as required.
• Discard the oil seal after removal and replace
with new ones.
(1) Rack piston
(2) Outer side oil seal
STEERING GEARBOX [RHD MODEL]
S4M0411A
PS-58
17) Insert the ST from valve side and press back-
up ring and oil seal out.
CAUTION:
Discard the back-up ring and oil seal after re-
moval and replace with new ones.
ST 927580000 REMOVER
G4M0822