CLUTCH SYSTEM
5) Adjust the spherical nut of the lever end so that
the play and full stroke is within the specified value,
(center of spherical nut).
CAUTION:
Take care not to twist the cable during adjust-
ment.
Play: 3 — 4 mm (0.12 — 0.16 in)
Full stroke: 24 — 26 mm (0.94 — 1.02 in)
(A)
(A) Play
(B) Full stroke
6) Upon completion of adjustment, securely lock
the spherical nut with lock nut.
Tightening torque:
5.9 N·m (0.60 kgf-m, 4.3 ft-lb)
(A)
(B)
(A) Lock nut
(B) Spherical nut
(C) Clutch release lever
7) Install the return spring on lever.
NOTE:
Hook the long hook side of the return spring with
the lever.
8) Depress the clutch pedal to assure there is no
abnormality in the clutch system.
9) Install the air cleaner case and intake duct. <Ref.
to IN-6, INSTALLATION, Air Cleaner Case.> and
<Ref. to IN-7, INSTALLATION, Air Intake Duct.>
CLUTCH PEDAL
(B)
TR0504
(C)
TR0505
CL-48