Subaru 2002 IMPREZA Service Manual page 1870

CLUTCH SYSTEM
2. RHD TURBO MODEL
1) Apply a coat of grease to the contacting surfaces
of the push rod and piston before installation.
Grease:
SILICONE GREASE G40M (Part No.
004404003)
2) Assemble in the reverse order of disassemble.
E: INSPECTION
If any damage, deformation, wear, swelling, rust or
other faults are found on the cylinder, piston, push
rod, fluid reservoir, return spring, gasket, clutch
damper, cylinder boot and hose replace the faulty
part.
(C)
(B)
(A)
(F)
(A) Master cylinder body
(B) Return spring
(C) Piston
(D) Stop ring
(E) Rod ASSY
(F) Clutch damper
(G) Cylinder boot
MASTER CYLINDER
TR0526
(G)
(D)
(E)
TR0905
CL-34